VFD Electronic Weighing Indicator Controller For Weight Increment DO Output Mode

Power Supply: DC24V±15%, 50/60Hz, Max. 10W.

Loadcell Excitation Voltage/Current: DC10V/250mA.

8 Loadcells[350Ω] connectable.

Weighing Signal Input Range: 0~25mV.

3 Normally Open Switch Inputs [DI].

4 Normally Open Relay Outputs [DO]: AC250V/DC24V, 1A.

1 Analog Signal Output [AO]: 4~20mA, 0.05%FS.

Accuracy Grade: III.

COM1: Fixed RS232&RS485. Free to use one of them.

COM2: Optional RS232/RS485/RS422/Profibus-DP/Ethernet.

Connect Host IPC, Remote Display, Printer&Wireless Module.

Outline Size [W×H×D]: 160 × 84 × 188 mm.

Panel Cut-out Size [W×H]: 151 × 76 mm.

Operating Temperature: -25℃~+45℃.

Protection Level of Front Panel: IP65.

Verification Accuracy: 0.02%.

Static Weighing Accuracy: 0.2%~0.5%.

Warranty:

The warranty period for our products is 12 (twelve) months.

If the products from SUPMETER are proved to be unable to work normally due to unartificial reasons, and the problems can't be solved by customers under the technical support from SUPMETER, then customers can send the problematic items back to SUPMETER. SUPMETER is RESPONSIBLE to MEND (or REPLACE when necessary) them FREE OF CHARGE.

(Note: if after checking, the returned goods are proved to be in good condition, the trouble is resulted to be caused by improper operation by customers, SUPMETER is IRRESPONSIBLE to bear the shipping & other charges related to the returning.)

Company: